Browse: | |
---|---|
Taobao link: | See details |
Add Time: | 2016-03-27 13:30:22 |
Recommendation: | ![]() ![]() ![]() ![]() ![]() |
FY3200S Series program
Dual function / arbitrary waveform function generator
Product description
FY3200S Series of function / arbitrary waveform generator with a large CMOS High speed integrated circuits, microprocessors, internal circuits using Active Crystal base, high signal stability. Surface mount technology greatly improves the immunity and longevity. Frequently used features one-button operation, greatly improves the workability and practicality!
Instruments with dual function / arbitrary waveform output, can produce a sine wave, square wave, triangle wave, sawtooth wave, pulse, Lorentz pulse, multiple audio, random noise, ECG, trapezoidal pulses, Cink pulses, pulse, Gaussian white noise waveform, amplitude modulation, frequency modulation waveform, as well as user-defined waveforms. Instruments with dual TTL output (tunable phase difference). Instrument 100MHz cymometer and counter function, you can meet the measurement needs of most, the product also has a linear sweep, and logarithmic sweep function, can set arbitrary scan frequency range and scan time.
CH1 CH2 Two perfectly symmetrical, the parameters of each channel can be set independently. Maximum amplitude of output signal up to 20Vpp,FY3224Stwo-channel output signal can be up to 24MHz. The output signal frequency, amplitude, offset, phase, so that they can achieve program (instrument can display the output signal's amplitude and phase, waveform, parameter information, and make your operation more convenient). Are electronics engineers, laboratories, production line and the ideal equipment for teaching and research!
FY3200S Models in the last two digits 00 said this type of instrument the sine wave frequency upper limit (MHz). Example:FY3206S,06 indicates that the model sine wave output frequency of up to 6MHz.
◆ DDS direct digital synthesis technology generate accurate, stable and low distortion output signal;
◆ CH1 CH2 Two perfectly symmetrical, the parameters of each channel can be set independently.
◆ Supporting user-defined waveforms, each set of arbitrary waveform memory depth 2048*12bits,250MSa/s sampling rate;
◆ Burst burst output function, players trigger, CH2, trigger and trigger three triggering modes , can make the machine output 1~1048575 any number of pulses;
◆ Measurements: instruments with 100MHz frequency meter function and pulse counter functions
◆ Minimum signal output amplitude up to 10mVpp, the largest up to 20Vpp, offset of the output signal level -10V~10V adjust
◆ Waveform generator bandwidth of up to 12 -bit , more refined output waveform, waveform distortion magnitude decreases
◆ Featuring full CNC function, you can display and digital regulation current output signal amplitude, offset, frequency, duty cycle and the phase difference between two signals
◆ After the instrument connected to the computer, use the computer signal generator by PC control of all functions and parameters, downloading and editing of arbitrary waveform on the computer to the instrument output waveform
◆ Communication: serial communication, agreement is fully open and user-friendly secondary development
◆ High frequency precision: frequency precision can reach 10-6 orders of magnitude
◆ High frequency resolution: full-range frequency resolution 10mHz
◆ Tracking features: built-in frequency, amplitude, offset, duty cycle, waveform parameters follow function, easy to use
◆ Scanning: with linear sweep and logarithm of the frequency scan function, the scan start and end points can be set
◆ Storage features: you can store 20 set instrument parameters set by the user, and may at any time call up to reproduce
◆ Operation mode: key operation,LCD1602 English LCD display, direct digital sets or knob adjustable parameters
◆ Input over-voltage protection: the power supply input range is extended to AC85V to AC240V wide voltage
◆ Output short circuit protection: all signals are available on the load at the output short circuit situations 60S above
◆ With my company FYV2000 series or FPA1000 series power amplifiers, signal DC-3MHz bandwidth and stable output greater than 20W of power without distortion signal ,FPA1016 maximum output power up to 60W.
Technical specifications
Product specifications | FY3206S | FY3212S | FY3220S | FY3224S |
Sine wave frequency range | 0Hz - 6MHz | 0Hz - 12MHz | 0Hz - 20MHz | 0Hz - 24MHz |
Square-wave frequency range | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz |
Triangle-wave frequency range | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz |
Other wave frequency range | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz |
Signal output parameters | |
Output channel | Main wave of two independent output channels. |
Output waveform | Sine wave, square wave, triangle wave, sawtooth wave, pulse, Lorentz pulse, multiple audio, random noise, ECG and trapezoidal pulses, Cink pulses, pulse, white noise waveform, amplitude modulation, frequency modulation waveform As well as user-defined waveforms. |
Output amplitude | ≥20Vp-p ( No load) |
Output impedance | 50Ω±10% |
DC bias | ±10V |
Frequency resolution | 0.01Hz(10mHz) |
Frequency accuracy | ±5×10-6 |
Frequency stability | ±2×10-6 /3 Hours |
Sine wave distortion | ≤0.8% ( Reference frequency 1kHz) |
Triangle linearity | ≥98% (0.01Hz~10kHz) |
Square wave rise and fall time | ≤20ns ( Reference frequency 100kHz,10Vpp) |
Square wave duty cycle range | 0.1%~99.9% |
TTL Output | And CH1 channel and CH2 dual channel synchronization TTL Level output, tunable phase difference |
Range | >3Vp-p |
Fanout factor | >20 TTL Load |
TTL Level rise and fall time | ≤20ns |
Frequency counter functions | |
Counting range | 0-4294967295 |
Frequency measurement range | 1Hz~100MHz |
Input range | 1Vp-p~20Vp-p |
Scan function | This feature is available only if the master has |
Scan mode | Linear scanning, log scanning |
Frequency range | Arbitrary start point and end point setting |
Frequency sweep range | M1 Preset frequency ~M2 Preset frequency |
Scanning rate | 1s~999s / Step |
Other characteristics | |
Display mode | LCD1602 English LCD display |
Storage and redeployment capabilities | M0-M19 (M0: default calls into) |
Dimensions | 200mm ( Length ) x 190mm ( Width ) x 90mm ( High) |
Weight | 550 G (bare metal), annex ( 150 Grams) |
Buzzer function | Can use a program setting to turn on or off |
Manufacturing process | Surface-mount technology, VLSI, High reliability, long service life |
Operating characteristics | All buttons, knobs adjustable |
Environmental conditions | Temperature: 0~40 ℃ Humidity:﹤80% |
Wide voltage range | AC85~AC260V |