Runaway FYD56-8048-256 industrial screen
FYD70-8048-256 is a widely used in color TFT liquid crystal display device microcontroller systems, industrial control systems, with seven-inch large display area at the same time both the 800 * 480 resolution, greatly reducing the data transmission system and storage pressure, the 8-bit bus interface standard 8080 mode, color support 256 colors.
Unique 2 memory, a separate operation does not affect the other pages, but also to achieve two separate and superimposed display content, widely used in oscilloscopes, spectrum analyzer, etc. need to display multiple waveforms, cursor movement, menu display and so on, greatly reduced software workload does not read any page other pages. Providing 8:00 and write multi-write mode; simply send a command, the control board will fill the specified (8 points), greatly improved Chinese characters and English letters, numbers, and graphics display speed within 500 nanoseconds.
Ultra-high 30MHz read and write speeds without waiting bus, a single point of read and write cycles of up to 40ns, without any waiting. It can be any high-speed system interfaces.
Optional modules can also be imported at the same time high-quality industrial-grade touch screen and touch screen controller with a resolution of up to 4096 points. Just five lines and can seamlessly link without any external microcontroller analog circuits, is doing ideal for industrial control.
Single 5v power supply module, abandoned the high energy consumption CCFL backlight lamp, afraid of vibration, easy to aging and other disadvantages, the use of long-life LED backlight life of more than 100,000 hours, users do not need additional backlight bar. Pure color and backlight brightness software adjustable resolution of 8, users do not need additional PWM. Can effectively reduce system power consumption.
Providing GB2312 16 dot matrix Chinese character, 8 user IO expansion output and large capacity FLASH 4M-bit user space (FLASH 0x80000 position) can be flexibly stored picture or system application data, save you more cost.
Using ALTERA company's large-scale programmable integrated circuit programming, stable performance, high read and write speeds 25MHz bus without waiting for a variety of instrumentation, industrial equipment applications.
Adaptation CPU: AVR, PIC, STM32 series, LPC2XXX, MSP430,51,, DSP, FPGA 96, X86,8088, Z80 and so on.
Includes fixed-wing Board
8 8080 Bus interface
8 ( 256 )
About >140 º , >120º
Wide view scope
DC 5 V
Working environment temperature
-20 ~ 70 ℃
Industrial temperature range
-30 ~ 80 ℃
4 -Wire resistive, 10Resolution touch screen controller
Imports of industrial-grade
Data bus width
24MHz (Single write cycles is less than 40ns)
Double display buffer
4 Display combinations:
0 Display separate
1 Display separate
0 Top display, 1Displayed at the bottom
0 、 1 Layer display
Write mode extensions
8 Write more, write
500 Filled in the nanosecond 8
Chinese character library
16 Dot-matrix hardware Chinese character fonts,ASCII Both English and Chinese characters
4M User application space
Rows, columns, rapid positioning
LED Backlight, built-in software 8 -level backlight controllers
Is greater than 10Million hours
The static reactor rejection
Measured is greater than the 6KV
51 、 LPC213x 、 stm32
Provide technical support
Double display function: Our LCD screen provides powerful Double the video memory to display Function, note well, is also shown, rather than just two memory.Can one show shading, a displayed waveform, the oscilloscope, Spectrum Analyzer, signal generator, temperature profile recorder real-time display, simplify the programmer's job, the effect is shown in the following figure:
Eight adjustable backlight: My company's large-size LCD screen ( 4.3 Inches or more) backlight 8 Adjustable, brightness can make your products more user-friendly.